 |
| Fig 1: Wireshark |
Sniffer
Sniffers are programs that capture and analyze network data. A sniffer can be used to capture data that is not in a format that can be analyzed by a protocol analyzer. For example, a sniffer can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. A sniffer can also be used to capture data that is not in a format that can be analyzed by a protocol analyzer.
Wireshark
By using Wireshark, you can capture and analyze the data from a network. You can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc.
Introduction
Wireshark is a network protocol analyzer. You can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. You can also see and analyze the network activity of different devices on the network.
The Basics
Wireshark can be used to sniff the network. You can use Wireshark to capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. You can also view the data in the ASCII format. You can also search for the packets based on different criteria like packet content, destination IP, etc. You can view the network activity of different devices on the network.
What is the scope of Wireshark?
Wireshark can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. Wireshark can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc.
What Does Wireshark Do?
Wireshark is an open-source packet analyzer. It has the following capabilities:
- Capture, filter and replay packets.
- Display packet headers and raw data.
- View raw packet data in the ASCII format.
- Search for packets based on different criteria like packet content, destination IP, etc.
- Automatically disassemble and decompress protocols like TCP, UDP, ICMP, HTTP, HTTPS, etc.
- Graph the data.
- Compare and analyze the data from different protocols.
- Create and view the traffic in the Graphical Protocol Analyzer (GPA).
- Wireshark is a packet sniffer.
Wireshark Setup
There are different methods to set up Wireshark in system. You can download the latest version of Wireshark from the Wireshark website.
- Open the downloaded archive and unzip the package.
- Open the terminal and change the working directory to the location where you have unzipped the package.
- Now, you install Wireshark.
How do I use Wireshark?
You can use Wireshark by either starting it from the command line or using the graphical user interface (GUI). Wireshark has both GUI and command line interfaces.
- Using the GUI
- You can start Wireshark from the command line by typing the following: $./wireshark
- You can also start Wireshark from the graphical user interface.
- Go to Start > Programs > Wireshark > Wireshark
- Select the first option (Run as Administrator)
- Enter the password if required
- Click OK
- The Wireshark GUI will start.
How does Wireshark work?
Wireshark works by capturing and analyzing the data that flows across a network. Wireshark can capture and analyze data from different protocols like TCP, UDP, ICMP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. You can see and analyze the network activity of different devices on the network.
Wireshark also supports analyzing and displaying a wide variety of information such as:
- Packet capture data
- TCP/IP protocol stack information
- TCP, UDP, ICMP, ARP, DHCP, HTTP, HTTPS, DNS, NTP, SNMP, FTP, etc. protocols
- Captured data
- Traffic information
- Host information
- Domain
What is the target audience?
You should use Wireshark if you plan on:
- Analyzing network data
- Analyzing traffic flows on any network such as LAN, WAN, Internet or Intranet
- Analyzing packets for security and intrusion
What is the default Wireshark Port?
If you are capturing Wireshark traffic on your system, make sure you don’t have another program running on the same Wireshark port. You can use Wireshark by logging in using a remote host. If you are logging in using the Linux or Mac command line, the default Wireshark port is 53, for Windows users, the default Wireshark port is 1024.
Other Wireshark Resources
https://www.wireshark.org/
0 Comments